Welcome, Guest
(92 Viewing)  (92) Guest

TOPIC: Beach and Water Detecting 101: Getting Started

Beach and Water Detecting 101: Getting Started 8 years 11 months ago #2608

  • wreckdiver
  • wreckdiver's Avatar
  • Administrator
  • Posts: 2497
  • Thank you received: 178
  • Karma: 56
Thanks Terry for writing this article and allowing us to publish your work on our Front Page.

Beach and Water Detecting 101: Getting Started

By Terry Soloman -

Metal detecting for coins and jewelry on America's fresh- and saltwater- beaches, has never been more popular or profitable. Folks have been going to the beach, and losing their belongings in the sand and surf, since the beginning of time. Today's metal detector manufacturers offer units specifically engineered for the surf and sand treasure hunter, and there's no shortage of beach equipment or accessories to choose from when you decide to dive in! Lets start by looking at the machines we use to find treasure on America's beaches.

Very Low Frequency and Pulse Induction metal detectors.

The first thing to determine is what type of water, or beach you will be hunting. Are you detecting in the saltwater and on wet ocean sand, or will you be hunting dry sand and freshwater lakes and river beaches? This is important because there are different metal detectors designed for fresh- or, salt- water use. For instance, a "VLF" or very low frequency type metal detector, works extremely well on dry sand and in fresh water. It does not work as well in saltwater, or on wet ocean-water beaches. In highly conductive saltwater conditions pulse induction, or "PI," metal detectors excel.

The VLF metal detector sends 12,000 - 60,000 radio waves per-second into the ground. When the radio waves hit something conductive - like an iron nail, gold ring, coin or aluminum pulltab, a magnetic field sets up around the object and a particular signal frequency is transmitted back to the detector's receiving coil. VLF metal detectors have the ability to "discriminate," or tell what type of metal they are seeing by "reading" the return signal frequency. An iron nail for example, has a different frequency than a silver coin. The processor in the metal detector knows the difference between the two, and can be set to remain silent when seeing the nail. However, the radio waves bounce off everything that is conductive in the sand or water. This is why VLF detectors must be "ground balanced" to work effectively in highly mineralized soil, or on highly conductive saltwater beaches. You must tune or adjust the machine to see through the "fog," or white-noise created by the salt and iron in the sand or water you are detecting. Unfortunately, this usually leads to a loss of depth and stability with most VLF detectors.

A pulse induction or, "PI" metal detector, sends out hundreds of electric pulses-per-second, rather than thousands of radio waves. While PI metal detectors do not have the ability to discriminate between different types of metal, their powerful pulses go much deeper than the VLF signal, and eliminate the problem of mineral conductivity. A pulse induction detector measures the decay rate of the electronic pulses it sends out, and looks for anomalies. The strong electronic pulse is not conducted by the salt in the water or the iron in the black sands. Think of a Navy ship "pinging" with its sonar for an enemy submarine. If there is nothing in the water the "ping" just continues on and fades out at the same measured rate. If the submarine is there, the signal decay is interrupted and bounces back to the sonar operator on the ship.

Most successful ocean-beach detectorists, own both types of detector. The land-based VLF unit is preferred in the dry sand blanket area because you can use discrimination to knock out iron and still achieve superior depth without loss of stability. The pulse induction machine is used on the wet ocean- and black- sands, as well as in the surf.

Beach and Water Hunting Equipment

Sand Scoop - Whether hunting fresh- or salt- water beaches, you need the right equipment to recover your targets. A good beach or sand scoop is a must. Choose your scoop based on the types of beaches you will be hunting, and the area of the beach. Generally, a long-handled large capacity sand scoop is desirable in the water. Aircraft-grade aluminum and stainless steel scoops come in a variety of shapes, lengths, weights, and prices. In the dry sand, a short-handled scoop is usually faster and easier to use. Do not buy a cheap scoop. This piece of equipment is essential - and just as important to your success as the metal detector you choose.

Finds Pouch - You will need a pouch to put your finds in. An inexpensive cloth nail pouch works great on the beach, but you will need something a bit more substantial for your wet sand and water finds. Large, open mesh, multi-pocket belt pouches with Velcro closures are ideal for the water. They allow the sand and water to rinse out, and secure your finds so they are not lost in the surf - again!
Waders - Waders are the least expensive way to get into the surf at low tide. In most ocean beach situations, waders will only be serviceable to depths just above the knee due to wave action. Important things to look for in quality waders include weight; fabric thickness; flip out storage pockets; high-density neoprene booties (rather than heavy rubber boots); and a good wading belt should be included. Lightweight slip-on beach shoes can be worn over the neoprene booties.

Wetsuits - Fit is the most important factor when purchasing a wetsuit. You must try on the wetsuit, as every wetsuit manufacturer's size chart is different. Thickness is also important. The thicker the suit, the warmer. 'Smoothie' neoprene, stretches better and is warmer in windy conditions. Seams are also important. The types of seams used in a wetsuit differ greatly. An "Overlock" seam, is found on inexpensive suits. This type of stitch lasts forever but it is not watertight, and can cause skin irritation or a rash as it protrudes against the skin. A "Flatlock" seam, is a flat stitch that does not push into your skin like the overlock. It is not watertight, but does not cause as much of a rash or chaffing problem. The "Blindstitch," is a flat stitch that does not penetrate all the way through the neoprene, so there are no stitch holes. It is watertight which makes a tremendous difference. Blindstich seams are found only on more expensive wetsuits. Last but not least, wetsuit zippers - or closures, are extremely important. "Back-zip" suits are the most common type. Look for a sturdy metal zipper (rather than plastic), and thick flaps behind the zipper to prevent water flushes. You would look for the same qualities in a "Shoulder-zip" suit.

Footwear - There are dozens of choices when it comes to beach and water shoes, and many bargains to be found. Look for a shoe that meets your exact needs. It should be metal-free, and as light as possible without sacrificing your overall comfort. Beach hunters can spend four- to six- hours gridding the sand at their local beach. Comfort and breathability are extremely important.

Hat - Anyone who spends a lot of time on the beach knows the importance of a quality, long billed cap. There are several things to look for in a good beach detecting cap. Be sure the cap feels comfortable with your headphones and sunglasses on. A cap should be breathable, and offer a sun flap to protect the back of your neck.

Sunglasses - Eye protection should be a top priority while spending long hours in the sun. Extended exposure to reflected light and glare from sand and water can cause real discomfort, and even damage to your eyes.

Beach Detecting Strategies; When and Where to find treasure on the beach

The beach is divided into two-sections - The "Dry Sand" or blanket area, and the "Wet Sand" or swimming area. When detecting the dry sand areas, successful beach hunters "grid" individual sections of the beach. Start by choosing an area 50-feet long, by 50-feet wide. First detect from the North to South. When you have detected the entire grid, turn 90-degrees and detect it again East to West. Moving slowly and methodically, you will be able to pass your coil over every inch of the 50' x 50' area. Coins, watches, rings, bracelets, Ipods, cell phones, car keys - you'll find it all! The phrase to remember is "low and slow." Keeping your coil as low and flat to the sand as you can, while moving slowly enough to assure your sweeps overlap each other is the real key to success.

For tips on hunting the surf and wet sand I consulted with Rusty Henry. Rusty is a retired Navy "frogman," and an original Seal Team 2 member. He is a living metal detecting legend, and has been the Service Manager at Tesoro Electronics for 20-years. Rusty says rings and jewelry are lost in the water during both High, and Low tides. You can get to these treasures much more quickly during Low tide however. "At Low tide, get into knee- to thigh- deep water to get to the jewelry that was lost at High tide by people swimming, frolicking, throwing Frisbees, footballs and such," says Rusty. "Look for streaks of Black sand on the beach at the waterline. These are always an indicator of where other heavy things like coins and jewelry will be deposited. Many beaches will only have Black sand streaks after a storm, or unusually heavy wave action. Storms uncover things that have been out of reach for many years as the sand gets ripped away. You have to act fast however during low tides, as a couple tide changes can start covering it all up again." Rusty says after a violent storm, look for hard clay patches that are showing and, "detect the small depressions that look like miniature potholes."

Before packing the vehicle with your beach gear and metal detector, be sure to check your local city and state rules and regulations. Many states and cities are now requiring you to possess a valid "Metal Detecting Permit," and have strict guidelines for detectorists. Along the "Treasure Coast" in Florida, you may detect the dry sand and shore only to the waterline because the state leases the water rights to treasure hunters (similar to gold claims). These waters are vigorously patrolled by the state. In New York, you must have a permit to detect the state-owned beaches of Long Island. The annual permit is good from Jan. 1 - Dec. 31, and costs US$40.00. The state parks like Jones Beach, and Robert Moses, are heavily patrolled. A ticket for detecting without a permit within a NYS park is US$165.00 - Do your research and have the permits and permissions required to be on the beach you will be hunting.

Whether on the dry sand or in the ocean surf, metal detecting the beach is one of the most rewarding experiences a treasure hunter can have. From pocket change and Ipods, to old coins, diamond rings and gold chains, America's beaches are living treasure troves. A healthy and heavenly place for the metal detectorist, and naturally replenished and re-seeded every spring and summer. So what are you waiting for? Let's hit the beach! ###

SIDEBAR - How Much Does it Cost?

The beginning beach hunter should expect to invest $500- $1,000.00 for the basic equipment needed to hunt the sand and surf. Here is a breakdown of the basic equipment needed, and the average retail cost (new):
Tesoro Vaquero (VLF) metal detector $450.00
Tesoro Sand Shark (PI, Waterproof) metal detector $580.00
Reilly's Treasured Gold Pro Aluminum 6" Water Scoop $140.00
KellyCo Three-pocket Mesh Finds Pouch $20.00
Reddington Crosswater Waders with neoprene booties $100.00
Henderson 3/2mm XSPAN Super Stretch Wetsuit with 3mm Zipper Dive Boots $190.00
Eco UV Outdoor Hat $15.00
Speedo beach shoes $25.00
As Seen on TV Wrap Around Sunglasses $9.99
New York State Metal Detecting Permit $40.00
The reward and joy of finding your first gold or diamond ring - Priceless!

Courtesy Terry R. Soloman
“Treasure – If it’s out there, we’re going to find it!” (Tommy Vawter)
Last Edit: 8 years 11 months ago by wreckdiver.
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 11 months ago #2614

  • Terry Soloman
  • Terry Soloman's Avatar
  • Senior Treasure Hunter
  • Posts: 136
  • Karma: 4
Thank YOU Tommy! I really hope that the article will be a solid STARTING point for the new beach hunter, and inspire them to research this wonderful addiction further! When Carla Banning (Lost Treasure Magazine), told me it was scheduled for publication in their annual "Treasure Facts" edition, which comes out in December, I was very disappointed the info was not going to reach newbies like me, THIS summer. Thank you for judging the article worthy of your site Tommy, and for helping to educate new beach hunters like myself. When you are ready to dodge big mountain cats and rattlesnakes, instead of rip currents and sharks, come to Arizona with me and I'll take you to a little patch of yellow I know! - Terry
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 11 months ago #2615

  • Big Daddy 2112
  • Big Daddy 2112's Avatar
  • Treasure Hobbyist
  • Posts: 14
  • Thank you received: 1
  • Karma: 0
Thanks Terry for clarifying the difference between the Very Low Frequency and Pulse Induction metal detectors. I always knew that my detector did not work well in wet salt sand and now I understand why. For those of you reading this take heed to the “grid pattern” Terry talks about in this article. You will be much more successful than the guy walking down the beach in a straight line swinging like a mad man and walking as if he is in a foot race.

Also for dry sand hunting the best times are early morning until 9:00am-10:00am when people start to come out on the beach, and early evening when most of the crowd has gone for the day. I recommend an LED light that clips on to the bill of your cap so that you can hunt on into the night. I have been out on the beach as early as 1:00am and hunted till the beach was starting to crowd up before calling it a day. I also look for the impressions in the sand where beach blankets and chairs were. Coins and jewelry and other valuables could lay at the perimeter of these impressions.
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 11 months ago #2621

  • Terry Soloman
  • Terry Soloman's Avatar
  • Senior Treasure Hunter
  • Posts: 136
  • Karma: 4
Thank you BD! Great advice on times to detect, and on the LED headlamp!
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 11 months ago #2635

Excellent article Terry, many thanks! That is a ton of good treasure hunting information.
To Swim Is Human, To Dive Is SUBLIME
To bag a bug in total darkness . . . . is just the next step.
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 11 months ago #2636

  • BigDRN
  • BigDRN's Avatar
  • Junior Treasure Hunter
  • Posts: 69
  • Karma: 2
Thanks for the article. Many good points to be had!
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 10 months ago #2934

  • Au_Dreamers
  • Au_Dreamers's Avatar
  • Senior Treasure Hunter
  • Posts: 278
  • Thank you received: 3
  • Karma: 7
Excellent article and if you're not wearing a wetsuit don't forget the sunscreen!
The administrator has disabled public write access.

Re: Beach and Water Detecting 101: Getting Started 8 years 10 months ago #2942

  • Blackbeard
  • Blackbeard's Avatar
  • Senior Treasure Hunter
  • Posts: 218
  • Karma: 2
Good Article Terry I have a Fisher IV and once I hit the wet sand i get the false signals but false signals run on the ID tag in the 20's when i do get a hit for coins or jewelery the ID tag stays for example a quarter may read 79 to 81 I will get a continous reading at that ID so I know I have a quarter. Water Detecting especially in oceans detecting takes alot at of you with waves coming and going out.
The administrator has disabled public write access.

Beach and Water Detecting 101: Getting Started 4 years 1 month ago #16815

  • adolfainsley8
  • adolfainsley8's Avatar
ID tag stays for example a quarter may read 79 to 81 I will get a continous reading at that ID so I know I have a quarter. Water Detecting especially in oceans detecting takes alot at of you with waves coming and going out.

=== ===
Last Edit: 4 years 1 week ago by adolfainsley8.
The administrator has disabled public write access.
Moderators: Salvor6, LobsterPirate